The brake pedal goes to the ground. Causes, effects, solutions

Flying safety is essential and the correct functioning of the braking system is one of the most important elements of a vehicle. The brake pedal has the role of activating the braking system, ensuring the arrest or slowdown of the car in a controlled way. When the brake pedal goes to the ground, this can indicate a serious problem in the system and its ignorance can lead to dangerous accidents.

The brake pedal goes to the ground – causes

The problem with the brake pedal that descends on the floor can be caused by several factors:

Air in the braking circuit

The presence of air in the braking circuit is one of the most common causes. The air can enter the system after an inadequate maintenance work or the cause of a loss of brake fluid.

Fluid loss of the brake

A brake fluid loss reduces the pressure necessary to act correctly. This can occur due to a crack in the brake pipes or a damaged brake cylinder.

Damage to the main cylinder

The main brake cylinder is the component that generates pressure in the system. If it is damaged or worn, it will not be able to maintain the pressure, which will lead to the sinking of the brake pedal.

Problems to curb the heroes

Etriers play an essential role in applying pressure on the brake discs. If the heater is blocked or damaged, it can reduce brake efficiency, leading to a soft pedal.

The wear of the braking components

The component parts of the braking system, such as brake pads, discs and drums, are used over time. If these components are excessively worn, the system will not work at maximum capacity.

Effect

A lack of braking system has obvious and serious risks:

• Risk of accidents: a pedal that descends on the floor can drastically reduce the braking capacity, which can cause accidents in emergency situations;
• Vehicle control cable: the driver can lose control over speed and maneuverability, because the brakes do not react correctly;
• Degradation of braking components: the problem can lead to the deterioration of other system components, which means greater repair costs over time.

The brake pedal goes to the ground – solutions

To avoid serious consequences, it is essential to solve the problem of the brake pedal that goes to the ground. Here are some effective solutions:

Check and complete the brake fluid

Eliminate the air from the system

If the air is the cause, the solution is to completely remove the air from the system by purging. This procedure helps to restore normal pressure in the braking circuit.

Replace the main cylinder

If there is a problem on the main cylinder, its replacement is essential for the safety of the braking system. Although it may be an expensive repair, it is absolutely necessary to guarantee the correct functioning of the brakes.

Check the Caliors and replace the parts of waste

If the heater or other parts in the system are damaged or worn, they must be replaced. In addition, the replacement of brakes or brake discs may be necessary to maintain braking efficiency.

Automag.ro offers a wide range of essential components for the maintenance and repair of the braking system. These include:

• brake pipes: guarantees the integrity of the hydraulic circuit;
• Brake fluid – necessary to maintain pressure in the braking system;
• brake disc – key piece for efficient braking;
• brake drum – used in braking systems on the drum;
• Cylinder of the receiver: essential to apply the force on the brake pads;
• Complete sets and repairs set: for complete and efficient repair of the braking system.

Regardless of the problem you meet, Automag.ro offers you the necessary solutions to restore the safety of your vehicle!